Bostitch x 90mm 21° Stick Nails Ring Shank Nail 21° Galvanised (2000)

Product code: 111-2319

Packs of 2000 Round head nails.

These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads.

Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.

Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.

Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.



Gauge/Diameter (mm) 3.1
Length 90
21° Collation Angle
Profile RING
Finish G50
Description RH STICK 3.10-90 RING GAL-HD50 2M
Qty per box 2000

Will Fit F21PL-E, N79RH-2




Your Price: Please log in for price (excluding VAT)
Unit of sale:

1

  

Our refund policy

If any of our products fall below the high standard you expect, we'll happily refund or exchange it within 14 days. We will also refund or exchange it if you change your mind within 14 days, provided you return it as sold with all the original packaging, tags, labels and accessories. You'll need your order confirmation email to do this.

How to return your product

Product can only be returned to us once a valid returns number has been obtained. To return your item, call us on 03300 888 000 and provide us with your order and item details. We will confirm your returns number which you will need to note on the paperwork that you return with the item. We will also arrange for a courier to collect your goods [please note that a charge may apply depending on the reason for return]. Please make sure courier collected products are well packaged for their return journey.

Our electrical policy

If your electronic product develops a fault, call customer services on 03300 888 000. Our fully trained technical team can support you with advice on setup, parts or repairs for electrical products. If we can't repair it, we'll offer a replacement or a refund.

Please note that no returns will be accepted without a return number being provided by our Customer Service team in advance of return.

Bostitch x 90mm 21° Stick Nails Ring Shank Nail 21° Galvanised (2000)

Product code: 111-2319
Overall Rating
out of 5.